Disclaimer: This section is for informational purposes only. We are not liable for any damage caused to persons or personal property when attempting any of the how-to articles posted or linked to from our site. That being said, as long as you are careful and patient, you shouldn't have any problems. A-Pillar Removal Grab the top of the A-pillar, from the inside window edge, and pull it down while slightly rotating counter clockwise. There are 2 clips holding it in place as illustrated below. Once the clips have popped free, you will need to pull the panel out towards the cab while continuing a counter clockwise motion. There are 2 tabs at the base of the panel that rotate slightly while removing. Once removed, you may find that the metal clips come free from the panel and are stuck in the A-pillar still. You will need to remove them from the A-pillar and put them back on the panel before re-installing.     Do you have a How-To project you would like listed here or have you completed a project and would like to share your experiences with others, Contact Me.